Select Product
ATEM Television Studio 4K8
ATEM Television Studio HD8
ATEM Television Studio HD8 ISO
ATEM Microphone Converter
ATEM Constellation 8K
ATEM 4 M/E Constellation 4K
ATEM 4 M/E Constellation HD
ATEM 2 M/E Constellation HD
ATEM 1 M/E Constellation HD
ATEM 4 M/E Advanced Panel 40
ATEM 2 M/E Advanced Panel 40
ATEM 2 M/E Advanced Panel 30
ATEM 2 M/E Advanced Panel 20
ATEM 1 M/E Advanced Panel 30
ATEM 1 M/E Advanced Panel 20
ATEM 1 M/E Advanced Panel 10
ATEM Camera Control Panel
GPI and Tally Interface
ATEM Talkback Converter 4K
ATEM Studio Converter
ATEM Camera Converter
ATEM SDI Extreme ISO
ATEM SDI Pro ISO
ATEM SDI
ATEM Streaming Bridge
ATEM Mini Extreme ISO
ATEM Mini Pro ISO
ATEM Mini Extreme
ATEM Mini Pro
ATEM Television Studio 4K8 is a powerful Ultra HD live production switcher with a built in broadcast control panel. Get a fully featured broadcast quality live production studio with 8 12G-SDI inputs, 10 12G-SDI aux outputs for external recorders, 4 port 10G Ethernet switch, built in streaming, master recorder, multiview, USB webcam support, 2 DVEs, SuperSource, 4 ATEM Advanced Chroma Keyers, 2 media players, talkback and more!
NT$185,650
8
12
1.5G, 3G, 6G, 12G
1
2 x XLR balanced analog audio,
1 x BNC 32 Ch MADI digital audio,
2 x RCA stereo analog audio,
1 x 5 pin XLR Talkback.
4 x 1/4 inch Jack analog audio,
1 x BNC 64 Ch MADI digital audio, up to 50 active,
1 x 5 pin XLR Talkback.
4 Ch embedded audio on all SDI inputs.
16 assignable channels.
1 x BNC In, 1 x BNC Out.
1 x BNC In, 1 x BNC Out.
Tri-Sync or Black Burst.
On all 8 inputs.
On all 8 inputs.
10
1
2 x USB-C supporting 720p or 1080p at PGM frame rate.
1 x 12G-SDI
1 x HDMI 2.0
RJ12 supports RS-422
Ethernet. Direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
4 x RJ45 with internet network switch. Supports 10/100/1000/10G BASE-T.
2 x USB-C supports USB 2.0 for external drive recording, webcam out, software control, software updates and switcher connection.
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
2160p23.98, 2160p24, 2160p25, 2160p29.97
2160p30, 2160p50, 2160p59.94, 2160p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B, SMPTE 2081-1, SMPTE 2081-10, SMPTE 2082-1 and SMPTE 2082-10.
4:2:2
10-bit.
REC 709, REC 2020
Automatically detects between 1.5G-SDI, level A or level B 3G-SDI, 6G-SDI and 12G-SDI.
1
10
20
Tri-Color LED
6 rows 24 character LCD
1
1
10 plus shift 10
5
Set via system LCD menu display
8
12
1
2
2
6
1
1
1
1
4
2
4
1
2
7
1 Stinger, 1 DVE.
8
7
2
Integrated panel with full control of switching and settings.
16
Yes
Red for program and green for preview indication.
Yes
Yes
Supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared internet connection over USB‑C.
Direct recording to optional internal M.2 flash memory or to external media via USB-C expansion ports.
HD programs recorded as a H.264 .mp4 file at the streaming quality setting and at the ATEM video HD standard with AAC audio.
Ultra HD programs recorded as a H.265 HEVC file at the streaming quality setting and at the ATEM video Ultra HD standard with AAC audio.
Supports media formatted ExFAT (Windows/Mac). APFS or HFS+ (Mac).
1 x multi view via SDI and HDMI configurable to 16, 13, 10, 7 or 4 up views. Includes monitoring of Program, Preview, Inputs, Media Players, DSKs, SuperSource, Clean Feed with optional labels and audio meters.
HD or Ultra HD
1366 x 768
2
Fill and key for each media player.
20
PNG, TGA, BMP, GIF, JPEG and TIFF.
2 x up to 2160p60.
720 frames.
360 frames.
90 frames.
TGA sequence.
WAV, MP3 and AIFF.
< 10 lines when genlocked and in the same format as the switcher.
58 Channel mixer.
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
When used with most Blackmagic Design cameras, ATEM can control focus, iris and zoom of compatible lenses and camera settings including gain, white balance, tint, shutter, ND filter, color corrector, tally and record start/stop.
1 x multi view
ATEM Software Control Panel included free for Mac 12.0 Monterey, Mac 13.0 Ventura or later. and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240 AC 50/60Hz with IEC C14 socket.
1 x 4 pin XLR 12V DC In for external power supply or battery use.
120 W
Desktop or in-desk mount.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM Television Studio 4K8
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
ATEM Television Studio HD8 is a compact live production switcher with built in broadcast control panel. Get a fully featured broadcast quality live production studio with 8 standards converted 3G-SDI inputs, built in streaming, master recorder, multiview, USB webcam support, DVE, 4 ATEM Advanced Chroma Keyers, media players, talkback, 4 way Ethernet switch and optional internal cloud media storage.
NT$121,000
8
12
1.5G, 3G
1
2 x XLR balanced analog audio,
1 x BNC 32 Ch MADI digital audio,
2 x RCA stereo analog audio,
1 x 5 pin XLR Talkback.
4 x 1/4 inch Jack analog audio,
1 x BNC 64 Ch MADI digital audio, up to 50 active,
1 x 5 pin XLR Talkback.
4 Ch embedded audio on all SDI inputs.
2 Ch embedded audio on all SDI outputs.
1 x BNC In, 1 x BNC Out.
1 x BNC In, 1 x BNC Out.
Tri-Sync or Black Burst.
On all 8 inputs.
On all 8 inputs.
2
1
2 x USB-C supporting 720p or 1080p at PGM frame rate.
1 x 3G-SDI
1 x HDMI
RJ12 supports RS-422
Ethernet. Direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
4 x RJ45 with internet network switch. Supports 10/100/1000 BASE-T.
2 x USB-C supports USB 2.0 for external drive recording, webcam out, software control, software updates and switcher connection.
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B.
4:2:2
10-bit.
REC 709
Automatically detects between 1.5G-SDI and level A or level B 3G-SDI.
1
10
20
Tri-Color LED
6 rows 24 character LCD
1
1
10 plus shift 10
5
Set via system LCD menu display
8
12
1
2
2
6
1
1
1
1
4
2
4
1
2
7
1 Stinger, 1 DVE.
8
7
2
Integrated panel with full control of switching and settings.
16
Yes
Red for program and green for preview indication.
Yes
Yes
Supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared internet connection over USB‑C.
USB-C expansion port can record directly to external media.
Program recorded as a H.264 .mp4 file at the streaming quality setting and at the ATEM video standard with AAC audio.
Supports media formatted ExFAT (Windows/Mac). APFS or HFS+ (Mac).
1 x multi view via SDI and HDMI configurable to 16, 13, 10, 7 or 4 up views. Includes monitoring of Program, Preview, Inputs, Media Players, DSKs, SuperSource, Clean Feed with optional labels and audio meters.
HD
1366 x 768
2
Fill and key for each media player.
20
PNG, TGA, BMP, GIF, JPEG and TIFF.
2 x up to 1080p60.
400 frames.
200 frames.
TGA sequence.
WAV, MP3 and AIFF.
< 10 lines when genlocked and in the same format as the switcher.
58 Channel mixer.
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
When used with most Blackmagic Design cameras, ATEM can control focus, iris and zoom of compatible lenses and camera settings including gain, white balance, tint, shutter, ND filter, color corrector, tally and record start/stop.
None
ATEM Software Control Panel included free for Mac 12.0 Monterey, Mac 13.0 Ventura or later. and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240 AC 50/60Hz with IEC C14 socket.
1 x 4 pin XLR 12V DC In for external power supply or battery use.
100 W max.
Desktop or in-desk mount.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM Television Studio HD8
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
ATEM Television Studio HD8 ISO includes all the features of ATEM Television Studio HD8 plus adds ISO recording of all 8 inputs to separate video files. Also supports up to 8 remote cameras via local Ethernet or globally via the internet. Remote cameras even support tally and camera control!
NT$161,400
8
12
1.5G, 3G
1
2 x XLR balanced analog audio,
1 x BNC 32 Ch MADI digital audio,
2 x RCA stereo analog audio,
1 x 5 pin XLR Talkback.
4 x 1/4 inch Jack analog audio,
1 x BNC 64 Ch MADI digital audio, up to 50 active,
1 x 5 pin XLR Talkback.
4 Ch embedded audio on all SDI inputs.
2 Ch embedded audio on all SDI outputs.
1 x BNC In, 1 x BNC Out.
1 x BNC In, 1 x BNC Out.
Tri-Sync or Black Burst.
On all 8 inputs.
On all 8 inputs.
2
1
2 x USB-C supporting 720p or 1080p at PGM frame rate.
1 x 3G-SDI
1 x HDMI
RJ12 supports RS-422
Ethernet. Direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
4 x RJ45 with internet network switch. Supports 10/100/1000 BASE-T.
2 x USB-C supports USB 2.0 for external drive recording, webcam out, software control, software updates and switcher connection.
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B.
4:2:2
10-bit.
REC 709
Automatically detects between 1.5G-SDI and level A or level B 3G-SDI.
1
10
20
Tri-Color LED
6 rows 24 character LCD
1
1
10 plus shift 10
5
Set via system LCD menu display
8
12
1
2
2
6
1
1
1
1
4
2
4
1
2
7
1 Stinger, 1 DVE.
8
7
2
Integrated panel with full control of switching and settings.
16
Yes
Red for program and green for preview indication.
Yes
Yes
Up to 8
RTMP video with audio over a local network or internet connection from compatible Blackmagic Design cameras outputting HyperDeck High, HyperDeck Medium, HyperDeck Low, Streaming High, Streaming Medium or Streaming Low quality setting.
Mapped to inputs in ATEM Software Control Settings.
Supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared internet connection over USB‑C.
USB-C expansion port can record directly to external media.
Program recorded as a H.264 .mp4 file at the streaming quality setting and at the ATEM video standard with AAC audio.
SDI inputs recorded as separate H.264 .mp4 files at up to 70Mb/s quality at the ATEM video standard with AAC audio.
Audio inputs recorded as separate 24‑bit 48KHz .wav files. Includes 8 x SDI 2 channel embedded audio inputs, 4 x analog audio inputs and up to 32 channels of MADI digital audio.
Program switching recorded as a DaVinci Resolve project .drp file.
All media pool stills and clips saved to a separate media folder.
Supports media formatted ExFAT (Windows/Mac). APFS or HFS+ (Mac).
1 x multi view via SDI and HDMI configurable to 16, 13, 10, 7 or 4 up views. Includes monitoring of Program, Preview, Inputs, Media Players, DSKs, SuperSource, Clean Feed with optional labels and audio meters.
HD
1366 x 768
2
Fill and key for each media player.
20
PNG, TGA, BMP, GIF, JPEG and TIFF.
2 x up to 1080p60.
400 frames.
200 frames.
TGA sequence.
WAV, MP3 and AIFF.
< 10 lines when genlocked and in the same format as the switcher.
58 Channel mixer.
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
When used with most Blackmagic Design cameras, ATEM can control focus, iris and zoom of compatible lenses and camera settings including gain, white balance, tint, shutter, ND filter, color corrector, tally and record start/stop.
None
ATEM Software Control Panel included free for Mac 12.0 Monterey, Mac 13.0 Ventura or later. and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240 AC 50/60Hz with IEC C14 socket.
1 x 4 pin XLR 12V DC In for external power supply or battery use.
100 W max.
Desktop or in-desk mount.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM Television Studio HD8 ISO
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
Now it’s easy to expand the MADI input on the ATEM Television Studio switchers to add multiple microphones or external audio mixer sources. The ATEM Microphone Converter simply plugs into the ATEM Television Studio MADI port, so there's no complex setup required and additional units can even be daisy chained for more sources. Each converter has 4 analog inputs that are mic/line selectable and have phantom power. The design features amazing audio quality with an extremely low noise floor, a wide dynamic range and very low distortion. The design even uses 8 separate ADCs on each separate input that work together to extend dynamic range! There is also an HDMI monitoring output with scrolling audio waveforms.
NT$13,950
4 x Combination 3-pin XLR and TRS 1/4 inch Jack switchable between +24dB line and mic level with support for +48V phantom power.
1 x BNC supports 64 channel MADI digital audio
1 x BNC supports 64 channel MADI digital audio
1 x monitor out.
1 x USB-C with locking screw
Supports 10/100/1000 BASE‑T.
1080p24, 1080p25, 1080p30, 1080p48, 1080p50, 1080p60
Displays ATEM Microphone Converter name and 4, 8, 12 or 16 audio channels with 60 second waveform history. Also includes individual channel name, VU meters, mic or line level setting and phantom power status.
8
32-bit
131dB(A)
-129dBV
0.002%
24-bit
48KHz
AES10-2020
Mac™ and Windows™ software upgrade via USB or Ethernet.
Via downloadable utility application.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
USB and Ethernet via free software utility.
Mini switches for selecting mic or line level and setting +48V phantom power on/off.
1 x External 12V power supply with locking connector.
12W max.
12V to 17.5V DC
0° to 40°C (32° to 104°F)
-20° to 60°C (‑4° to 140°F)
0% to 90% non‑condensing
ATEM Microphone Converter
External 12V DC power supply with locking connector and international socket adapters for most countries.
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
Ultra HD live production switcher with so many features, you can combine them all to make an incredibly powerful 8K switcher! This massive 4 M/E switcher features 40 12G-SDI inputs, 24 12G-SDI aux outputs, 4 DVEs, 16 ATEM Advanced Chroma Keyers, 4 media players, 4 independent Ultra HD multiviews, 2 SuperSource processors and even standards conversion on all inputs! When switched to work in 8K, all of these features combine to make a powerful native 8K switcher! You even get built in talkback and a professional 156 channel Fairlight audio mixer with EQ and dynamics!
NT$454,250
40 x up to Ultra HD / 10 x in 8K
28 x up to Ultra HD / 7 x in 8K
24 x up to Ultra HD / 6 x in 8K
1.5G, 3G, 6G, 12G
2 x balanced 1/4 inch Jack, 1 x 32 stereo channel BNC MADI in.
2 x balanced 1/4 inch Jack, 2 x 32 stereo channel BNC MADI out.
None
Tri-Sync or Black Burst.
On all 40 inputs.
On all 40 inputs.
40 x 10-bit 720p, 1080i, 1080p, 2160p and 10 x 4320p switchable.
1 x 5 pin XLR Talkback.
16 Ch embedded into SDI output on all outputs.
1 x 5 pin XLR Talkback.
Any of the 24 SDI outputs.
None
Any of the 24 SDI outputs.
4 x up to Ultra HD / 1 x in 8K
4
None
RJ12 supports RS-422
Ethernet supports 10/100/1000 BaseT. Allows direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
1 x USB 2.0 port.
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50, 1080p59.94, 1080p60
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p50, 2160p59.94, 2160p59.94, 2160p60
4320p23.98, 4320p24, 4320p25, 4320p29.97, 4320p50, 4320p59.94, 4320p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B, SMPTE 2081‑1, SMPTE 2081‑10, SMPTE 2082‑1 and SMPTE 2082‑10, SMPTE 2082‑12.
4:2:2
10-bit.
REC 709, REC 2020.
Automatically detects between level A and level B 3G-SDI, 6G-SDI and 12G-SDI. Requires 2SI in 8K mode.
16 x up to Ultra HD / 4 x in 8K with Chroma/Linear/Luma key.
4 x up to Ultra HD / 2 x in 8K.
16 x up to Ultra HD / 4 x in 8K.
2
Yes
Yes
21 x up to Ultra HD / 7 x in 8K
4 Stinger, 4 DVE .
28 x up to Ultra HD / 7 x in 8K
21 x up to Ultra HD / 9 x in 8K
2
4 x up to Ultra HD / 1 x in 8K
Front fascia emergency switching, software or optional hardware panel.
64 x up to Ultra HD / 16 x in 8K
Red for program and green for preview indication.
Yes
4 x 16 Multi View pattern options for up to 64 total views.
Select HD, Ultra HD or 8K.
4 x up to Ultra HD / 1 x in 8K
Fill and key for each media player.
64 x up to Ultra HD / 24 x in 8K with fill and key.
4 x up to Ultra HD / 2 x in 8K with fill and key.
3200 frames.
1600 frames.
400 frames.
100 frames.
PNG, TGA, BMP, GIF, JPEG and TIFF.
TGA Sequence.
WAV, MP3 and AIFF.
Minimum monitor resolution of 1366 x 768.
Built in HD LCD monitor for video, 42 LED buttons for setup and emergency switching, 8 source buttons, 4 transition buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button.
< 7 lines in up to Ultra HD / in 10 lines in 8K
156 Channel mixer
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
None
ATEM Software Control Panel included free for Mac 10.13 High Sierra, Mac 10.14 Mojave or later and Windows 8.1 64-bit or Windows 10 64-bit.
Using USB 2.0 connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240 AC.
300W
2 Rack Unit Size.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM Constellation 8K
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
ATEM 4 M/E Constellation 4K is a massive 4 M/E Ultra HD live production switcher. It features 40 standards converted 12G-SDI inputs, 24 12G-SDI aux outputs, 4 DVEs, 16 ATEM Advanced Chroma Keyers, 4 media players, 4 independent Ultra HD multiviews, 2 SuperSource processors and more. You even get built in talkback and a professional 156 channel Fairlight audio mixer with EQ and dynamics!
NT$363,400
40
28
24
1.5G, 3G, 6G, 12G.
2 x balanced 1/4 inch Jack,
1 x 32 stereo channel BNC MADI in,
1 x 5 pin XLR Talkback.
2 x balanced 1/4 inch Jack,
2 x 32 stereo channel BNC MADI out,
1 x 5 pin XLR Talkback.
None
Tri-Sync or Black Burst.
On all 40 inputs.
On all 40 inputs.
40 x 10-bit 720p, 1080i, 1080p, 2160p.
8 Ch embedded audio on all SDI inputs.
1 x 5 pin XLR Talkback.
28 x 10-bit 720p, 1080i, 1080p, 2160p.
16 Ch embedded into SDI output on all outputs.
1 x 5 pin XLR Talkback.
Any of the 24 SDI outputs.
1
Any of the 24 SDI outputs.
4
None
1 x USB-C supporting 720p or 1080p at PGM frame rate.
RJ12 supports RS-422.
Ethernet supports 10/100/1000 BaseT. Allows direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
1 x USB-C port.
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60.
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60.
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B, SMPTE 2081‑1, SMPTE 2081‑10, SMPTE 2082‑1 and SMPTE 2082‑10, SMPTE 2082‑12.
4:2:2
10-bit.
REC 709, REC 2020.
Automatically detects between 1.5G-SDI, level A and level B 3G‑SDI, 6G‑SDI and 12G‑SDI.
16
4
16
2
Yes
Yes
21
4 Stinger, 4 DVE.
28
21
2
4
Front fascia emergency switching, software or optional hardware panel.
64
Red for program and green for preview indication.
Yes
4 x 16 Multi View pattern options for up to 64 total views.
Select HD or Ultra HD.
4
Fill and key for each media player.
64
4
3200 frames.
1600 frames.
400 frames.
PNG, TGA, BMP, GIF, JPEG and TIFF.
TGA Sequence.
WAV, MP3 and AIFF.
Minimum monitor resolution of 1366 x 768.
Built in HD LCD monitor for video, 42 LED buttons for setup and emergency switching, 8 source buttons, 4 transition buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button.
TBA
156 Channel mixer
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
TBA
ATEM Software Control Panel included free for Mac 12.0 Monterey, Mac 13.0 Ventura or later and Windows 10 and 11.
Using USB‑C connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB‑C to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240 AC 50/60Hz.
255 W
2 rack units height.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM 4 M/E Constellation 4K
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
The massive 4 M/E model doubles the features of the 2 M/E model with 40 x 3G-SDI inputs, 24 x 3G-SDI outputs, 4 DVEs, 16 ATEM Advanced Keyers, 4 multiviews and 2 SuperSource for 12 x DVEs in total.
NT$149,300
40
24
1.5G, 3G
2 x balanced 1/4 inch Jack,
1 x 32 stereo channel BNC MADI in.
1 x 5 pin XLR Talkback.
2 x balanced 1/4 inch Jack,
2 x 32 stereo channel BNC MADI out.
1 x 5 pin XLR Talkback.
8 Ch embedded audio on all SDI inputs.
16 Ch embedded audio on all SDI outputs.
None
Tri-Sync or Black Burst.
On all 40 inputs.
On all 40 inputs.
Any of the 24 SDI outputs.
Any of the 24 SDI outputs.
Any of the 24 SDI outputs.
None
1 x USB-C supporting 720p or 1080p at PGM frame rate.
4 x 3G-SDI
RJ12 supports RS-422
Ethernet. Direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
Supports 10/100/1000 BASE-T.
1 x USB-C supports USB 2.0
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B.
4:2:2
10-bit.
REC 709
Automatically detects between 1.5G-SDI and level A or level B 3G-SDI.
16
4
16
2
Yes
Yes
21
4 Stinger, 4 DVE.
28
21
2
Front fascia emergency switching, software or optional hardware panel.
64
Red for program and green for preview indication.
Yes
4 x multi views each configurable to 16, 13, 10, 7 or 4 up views. Includes monitoring of Program, Preview, Inputs, Media Players, M/Es, DSKs, SuperSource, Clean Feed with optional labels and audio meters.
HD
1366 x 768
4
Fill and key for each media player.
60
4 x up to 1080p60.
1200 frames.
600 frames.
PNG, TGA, BMP, GIF, JPEG and TIFF.
TGA Sequence.
WAV, MP3 and AIFF.
Built in 5 inch HD LCD monitor for video, 42 LED buttons for setup and emergency switching, 8 source buttons, 4 transition buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button.
< 10 lines.
156 Channel mixer
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
None
ATEM Software Control Panel included free for Mac 11.11 Big Sur, Mac 12 Monterey or later and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240 AC.
147W estimated.
2 Rack Unit Size.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM 4 M/E Constellation HD
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
ATEM 2 M/E Constellation HD is a high definition live production switcher packed with advanced features! The 2 M/E design includes 20 standards converted 3G‑SDI inputs and 12 independent 3G‑SDI aux outputs! It also includes a USB webcam output, SuperSource processor, DVEs, chroma keyers, media players, multiviews and more! You even get built in talkback and a professional built in Fairlight audio mixer with EQ and dynamics!
NT$68,500
20
12
1.5G, 3G
2 x balanced 1/4 inch Jack,
1 x 5 pin XLR Talkback.
1 x 5 pin XLR Talkback.
8 Ch embedded audio on all SDI inputs.
16 Ch embedded audio on all SDI outputs.
None
Tri-Sync or Black Burst.
On all 20 inputs.
On all 20 inputs.
Any of the 12 SDI outputs.
Any of the 12 SDI outputs.
Any of the 12 SDI outputs.
None
1 x USB-C supporting 720p or 1080p at PGM frame rate.
2 x 3G-SDI
Ethernet. Direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
Supports 10/100/1000 BASE-T.
1 x USB-C supports USB 2.0
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B.
4:2:2
10-bit.
REC 709
Automatically detects between 1.5G-SDI and level A or level B 3G-SDI.
8
2
8
1
Yes
Yes
11
2 Stinger, 2 DVE.
15
11
2
Front fascia emergency switching, software or optional hardware panel.
32
Red for program and green for preview indication.
Yes
2 x multi views each configurable to 16, 13, 10, 7 or 4 up views. Includes monitoring of Program, Preview, Inputs, Media Players, M/Es, DSKs, SuperSource, Clean Feed with optional labels and audio meters.
HD
1366 x 768
2
Fill and key for each media player.
40
2 x up to 1080p60.
800 frames.
400 frames.
PNG, TGA, BMP, GIF, JPEG and TIFF.
TGA Sequence.
WAV, MP3 and AIFF.
Built in 2.2 inch LCD monitor for video, 22 LED buttons for setup and emergency switching, 8 source buttons, 4 transition buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button.
< 10 lines.
48 Channel mixer
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
None
ATEM Software Control Panel included free for Mac 11.11 Big Sur, Mac 12 Monterey or later and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240 AC.
52W
1 Rack Unit Size.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM 2 M/E Constellation HD
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
ATEM 1 M/E Constellation HD is a high definition live production switcher packed with advanced features! The single M/E design includes 10 standards converted 3G‑SDI inputs and 6 independent 3G‑SDI aux outputs! It also includes a USB webcam output, DVE, chroma keyers, media players, multiview and more!
NT$40,200
10
6
1.5G, 3G
2 x balanced 1/4 inch Jack,
1 x 5 pin XLR Talkback.
1 x 5 pin XLR Talkback.
8 Ch embedded audio on all SDI inputs.
16 Ch embedded audio on all SDI outputs.
None
Tri-Sync or Black Burst.
On all 10 inputs.
On all 10 inputs.
Any of the 6 SDI outputs.
Any of the 6 SDI outputs.
Any of the 6 SDI outputs.
None
1 x USB-C supporting 720p or 1080p at PGM frame rate.
1 x 3G-SDI
Ethernet. Direct connection between panel and chassis, or via network.
Yes
RJ45 for 3rd party talkback systems.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included).
Supports 10/100/1000 BASE-T.
1 x USB-C supports USB 2.0
None
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SMPTE 292M, SMPTE 296M, SMPTE 424M, SMPTE 425M level A and B.
4:2:2
10-bit.
REC 709
Automatically detects between 1.5G-SDI and level A or level B 3G-SDI.
4
1
4
Yes
Yes
5
1 Stinger, 1 DVE.
7
5
2
Front fascia emergency switching, software or optional hardware panel.
16
Red for program and green for preview indication.
Yes
1 x multi view configurable to 16, 13, 10, 7 or 4 up view. Includes monitoring of Program, Preview, Inputs, Media Players, DSK, Clean Feed with optional labels and audio meters.
HD
1366 x 768
2
Fill and key for each media player.
20
2 x up to 1080p60.
400 frames.
200 frames.
PNG, TGA, BMP, GIF, JPEG and TIFF.
TGA Sequence.
WAV, MP3 and AIFF.
Built in 2.2 inch LCD monitor for video, 10 LED buttons for setup and emergency switching, 4 source buttons, 6 talkback selection and mix buttons, menu control knob and set button, front panel lock button.
< 10 lines.
28 Channel mixer
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control.
6 band parametric EQ, Dynamics including Expander, Gate, Compressor and Limiter.
None
ATEM Software Control Panel included free for Mac 11.11 Big Sur, Mac 12 Monterey or later and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS or Windows computers. Includes ATEM Setup Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240 AC.
36W
2/3 rack unit width, 1 rack unit height.
Teranex Mini Rack Shelf
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non-condensing
ATEM 1 M/E Constellation HD
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
This massive model is big enough to perfectly match the features on the ATEM Constellation switcher! It features 4 M/E rows with 40 input buttons per row and 4 independent system control LCDs for each row. This massive panel includes 24 LCD's for custom labeling of every button on every row!
NT$726,950
4 x 10/100/1000 BaseT with loop output for additional control panels or computers.
1 x USB-C for firmware updates.
4
40
80
Tri-Color LED
10 rows 24 character LCD
20
None
4 x Auto, Cut, Tie/Preview
4
Via main menu
4
4 x 20 buttons
4 x 40
24
4
4
4
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240V AC.
Yes
250W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
Up to 95%
ATEM 4 M/E Advanced Panel 40
1 Year Limited Manufacturer’s Warranty.
The 2 M/E model features 2 M/E rows with 40 input buttons and 4 independent system control LCDs for each row. Plus each row can control up to 4 M/Es in larger switchers. Both rows and all input buttons include LCDs for custom labeling. Each row also includes an independent select bus!
NT$395,700
4 x 10/100/1000 BASE-T with loop output for additional control panels or computers.
1 x USB-C for firmware updates.
2
40
80
Tri-Color LED
6 rows 24 character LCD
12
None
4 x Auto, Cut, Tie/Preview
2
Via main menu
4
4 x 20 buttons
2 x 40
8
2
2
2
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240V AC.
Yes
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
Up to 95%
ATEM 2 M/E Advanced Panel 40
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
The 2 M/E model features 2 M/E rows with 30 input buttons and 3 independent system control LCDs for each row. Plus each row can control up to 4 M/Es in larger switchers. Both rows and all input buttons include LCDs for custom labeling. Each row also includes an independent select bus!
NT$310,850
4 x 10/100/1000 BASE-T with loop output for additional control panels or computers.
1 x USB-C for firmware updates.
2
30
60
Tri-Color LED
6 rows 24 character LCD
12
None
4 x Auto, Cut, Tie/Preview
2
Via main menu
3
3 x 20 buttons
2 x 30
8
2
2
2
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240V AC.
Yes
120W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
Up to 95%
ATEM 2 M/E Advanced Panel 30
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
The 2 M/E model features 2 M/E rows with 20 input buttons and 2 independent system control LCDs for each row. Plus each row can control up to 4 M/Es in larger switchers. Both rows and all input buttons include LCDs for custom labeling. Each row also includes an independent select bus!
NT$242,200
4 x 10/100/1000 BASE-T with loop output for additional control panels or computers.
1 x USB-C for firmware updates.
2
20
40
Tri-Color LED
6 rows 24 character LCD
8
None
4 x Auto, Cut, Tie/Preview
2
Via main menu
2
2 x 20 buttons
2 x 20
8
2
2
2
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240V AC.
Yes
100W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
Up to 95%
ATEM 2 M/E Advanced Panel 20
1 Year Limited Manufacturer’s Warranty.
The ATEM 1 M/E Advanced Panel 30 features a single M/E row, 30 input button design that is ideal for switching big productions from desk surfaces that are not deep enough for a bigger panel. It has 3 independent system control LCDs plus it can control up to 4 M/Es in larger switchers. All input buttons include LCDs for custom labeling and it also includes an independent select bus! Dual power inputs provide redundancy and the built-in 4 port Ethernet switch means no additional network equipment is needed so it will fit even the most challenging live production spaces!
NT$222,000
4 x 10/100/1000 BASE-T with loop output for additional control panels or computers.
1 x USB-C for firmware updates.
1
30
60
Tri-Color LED
1
Via main menu
3
3 x 20 buttons
1 x 30
8
1
1
1
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240V AC.
Yes
80W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 95% non-condensing
ATEM 1 M/E Advanced Panel 30
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
The ATEM 1 M/E Advanced Panel 20 is a single M/E, 20 input button switching panel that includes the features and flexibility needed for switching big and small productions in a highly portable and compact design. It has 2 independent system control LCDs plus it can control up to 4 M/Es in larger switchers. All input buttons include LCDs for custom labeling and there is an independent select bus. Dual power inputs provide redundancy and the built-in 4 port Ethernet switch means no additional network equipment is needed so it will fit even the most challenging live production spaces!
NT$153,350
4 x 10/100/1000 BASE-T with loop output for additional control panels or computers.
1 x USB-C for firmware updates.
1
20
40
Tri-Color LED
1
Via main menu
2
2 x 20 buttons
1 x 20
8
1
1
1
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
2 x Internal 100 - 240V AC.
Yes
75W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 95% non-condensing
ATEM 1 M/E Advanced Panel 20
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
The new ATEM 1 M/E Advanced Panel is an elegantly designed professional hardware control panel for all ATEM switchers. It combines modern design with the latest broadcast technology for faster workflows. The new design features a built in LCD and high quality curved buttons that help reduce incorrect key presses. The buttons also have color backlighting to help you quickly recognize important keys. You also get a professional joystick for DVE and camera adjustments, smooth weighted t-bar fader and much more. The buttons feature dynamic displays that allow full customization of the labels as well as custom colors. The shift buttons allow you to double up the number of inputs by selecting a second set of shifted source buttons so you can control up to 20 inputs. The compact size and durable design of the ATEM 1 M/E Advanced Panel fits in a standard equipment rack, making it perfect for shelf mounting in broadcast trucks, mobile racks and fly away kits.
NT$121,000
2 x 10/100/1000 BaseT with loop
output for additional control panels or computers
1 x USB-C for firmware updates
10
20
Tri-Color LED
3 rows 24 character LCD
4
None
Auto, Cut, Tie/Preview.
1
Via main menu
3
20 buttons
10
None
1
1
1
1
1
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240V AC.
Yes
45W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
Up to 95%
ATEM 1 M/E Advanced Panel 10
1 Year Limited Manufacturer’s Warranty.
The ATEM Camera Control Panel provides independent controls for up to 4 URSA Mini, URSA Broadcast, Blackmagic Studio and Micro Studio cameras from a single control panel. You get iris control, shutter speed, white balance, master gain, pedestal, RGB controls for white and black, and more.
NT$121,000
2 x 10/100/1000 BaseT with loop
output for additional control panels or computers.
1 x USB-C for firmware updates.
4
Green off air, red on air.
White and black balance setup.
4
4
Auto Iris On, Coarse control.
Protects settings.
ATEM Software Control Panel.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x Internal 100 - 240V AC.
12-30V 3A.
Yes
30W
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
Up to 95%
ATEM Camera Control Panel
1 Year Limited Manufacturer’s Warranty.
Add tally to your ATEM switcher with Blackmagic Design's GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is 'on-air'! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.
NT$17,500
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
1 x USB 2.0 high speed interface for configuration and firmware updates.
Optical isolators triggered by connection to ground. Max 5V at 14mA.
Mechanical relay contact closure to ground. Max 30V at 1A.
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Firmware built into software driver. Loaded at system startup or via updater software.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
12V power supply included with international socket adaptors for all countries.
0° to 40° C (32° to 104° F)
-20 - 60 degrees celsius
Up to 95%
GPI and Tally Interface
Software CD
Power Supply
1 Year Limited Manufacturer’s Warranty.
ATEM Talkback Converter 4K handles up to 8 cameras for SDI talkback using embedded audio channels 15 and 16 as used on the Blackmagic Studio Cameras and ATEM Camera Converter. Supports 12G-SDI for all SD, HD and Ultra HD formats up to 2160p60 and provides BNC connections to each camera, and an optical fiber socket for adding an optical fiber SFP module for extending camera distances when required. Includes push to talk buttons, support for tough and common aviation headsets, loop through for more than 8 camera support, built in speaker, front panel mic input and much more.
NT$94,050
1 x 10-bit SD/HD/Ultra HD 4K auto switching
program input from switcher, including tally information with 16 channel embedded audio.
1 x 10-bit SD/HD/Ultra HD 4K auto switching
program loop thru output connects to another
ATEM Talkback Converter 4K.
Aviation Headsets with 0.25" TRS headset
connector and 0.206" TRS microphone connector. Front mounted balanced XLR microphone connector.
1 x stereo RCA monitoring output.
8 x 10-bit SD/HD/Ultra HD 4K auto
switching 16 channel embedded audio.
8 x 10-bit SD/HD/Ultra HD 4K auto
switching 16 channel embedded audio.
8 x 10-bit SD/HD/Ultra HD 4K auto
switching 16 channel embedded audio.
8 x single mode SD/HD/Ultra HD 4K auto
switching camera inputs with LC connector.
8 x single mode SD/HD/Ultra HD 4K auto
switching camera outputs with LC connector.
8 x single mode camera audio inputs with
LC connector. Channels 1 and 2 are camera audio. Channels 15 and 16 are intercom audio.
8 x single mode camera audio outputs with
LC connector. Channels 1 and 2 are camera audio. Channels 15 and 16 are intercom audio.
1 x mini-B type USB connector for firmware updates.
525i59.94 NTSC, 625i50 PAL
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
1080i50, 1080i59.94, 1080i60
2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p
2K DCI 23.98PsF, 2K DCI 24PsF, 2K DCI 25PsF
2160p23.98, 2160p24, 2160p25, 2160p29.97,
2160p30, 2160p50, 2160p59.94, 2160p60
4K DCI 23.98p, 4K DCI 24p, 4K DCI 25p,
4K DCI 29.97p, 4K DCI 30p, 4K DCI 50p, 4K DCI 60p
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M Level B, SMPTE 425M.
Television standard sample rate of 48Khz,
24-bit A/D conversion.
4:2:2, 4:4:4
10-bit
REC 601, REC 709.
SDI switches between SD, HD and Ultra HD 4K.
Via included updater application.
Mac 10.11 El Capitan,
Mac 10.12 Sierra or later.
Windows 8.1 and 10.
100 - 240V AC input with redundant 12 - 31V DC input.
60 Watts
1 rack unit size. Less than 6 inches deep.
0° to 40° C (32° to 104° F)
-20° to 45° C (-4° to 113° F)
0% to 90% non-condensing
ATEM Talkback Converter 4K
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
Excluding connectors, cables, cooling fans, fiber optic modules, fuses and keyboards which will be free from defects in materials and workmanship for a period of 12 months from the date of purchase.
ATEM Studio Converter is the ideal partner for the ATEM Camera Converter. Connect up to four Camera Converters via optical fiber up to 28 miles away with bi-directional video plus tally and talkback! Connect your ATEM switcher program output to the ATEM Studio Converter and this is distributed to the four Camera Converters. Multiple Studio converters can be cascaded together when more than 4 cameras are needed.
NT$71,800
1 x 10 bit SD/HD switchable program input
from switcher, including tally information.
4 x 10 bit SD/HD switchable camera outputs.
1 x 10 bit SD/HD switchable program loop thru output connects to another ATEM Studio Switcher.
Aviation Headsets with 0.25" TRS headset
connector and 0.206" TRS microphone connector. Front mounted balanced XLR microphone connector.
1 x stereo RCA monitoring output.
1 x combined headphone input. 1 x combined
microphone input. Combined inputs for connecting to other ATEM Studio Converters.
1 x combined headphone output. 1 x combined
microphone output. Combined outputs for connecting to other ATEM Studio Converters.
4 x camera stereo analog audio outputs.
4 x single mode SD/HD switchable
camera inputs with LC connector.
4 x single mode SD/HD switchable
camera outputs with LC connector.
1 x single mode camera
audio inputs with LC connector.
Channels 1 & 2 are camera audio.
Channels 15 & 16 are intercom audio.
1 x single mode camera
audio outputs with LC connector.
Channels 1 & 2 are camera audio.
Channels 15 & 16 are intercom audio.
1 x mini-B type USB 2.0 connector for firmware updates.
525i29.97 NTSC, 625i50 PAL
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
1080i50, 1080i59.94, 1080i60
2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p
2K DCI 23.98PsF, 2K DCI 24PsF, 2K DCI 25PsF
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30
2160p24
SMPTE 259M, SMPTE 292M,
296M, 372M, 424M Level B, 425M.
Television standard sample
rate of 48Khz, 24 bit A/D conversion.
4:2:2
10-bit
REC 601, REC 709
SDI switches between SD, HD, and UHD.
Converter Utility for firmware update.
Mac 10.11 El Capitan,
Mac 10.12 Sierra or later.
Windows 8.1 and 10.
100 - 240 V AC input with redundant 12 - 31V DC input.
0° to 40° C (32° to 104° F)
-20° to 45° C (-4° to 113° F)
0% to 90% non-condensing
ATEM Studio Converter
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
Excluding connectors, cables, cooling fans, fiber optic modules, fuses and keyboards which will be free from defects in materials and workmanship for a period of 12 months from the date of purchase.
Get everything you need for cameras in live production with a single converter! Connect your camera’s SDI or HDMI outputs for conversion to optical fiber, while your switcher program feed can be fed back via optical fiber for camera monitoring. ATEM Camera Converter includes an internal battery, talkback, tally, and microphone inputs!
NT$22,050
1 x 10 bit SD/HD switchable.
1 x 10 bit SD/HD switchable.
1 x HDMI type A connector.
1 x HDMI type A connector.
1 x 3.5mm stereo connector for talkback
microphone. 1 x 3.5mm stereo connector for stereo headphones, compatible with iPhone headsets.
2 x balanced 1/4" TRS connectors (stereo)
microphone level in. When connected, replaces
audio from SDI In or HDMI In.
1 x single mode SD/HD switchable with LC connector.
1 x single mode SD/HD switchable with LC connector.
1 x single mode camera audio inputs with LC connector. Channels 1 & 2 are camera audio.
Channels 15 & 16 are intercom audio.
1 x single mode camera audio outputs with LC connector. Channels 1 & 2 are camera audio.
Channels 15 & 16 are intercom audio.
1 x mini-B type USB 2.0 connector for
initial setup, firmware updates and
Converter Utility software control.
525i59.94 NTSC, 625i50 PAL
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1 2K DCI 24p, 2K DCI 25p
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 59.94, 60
SMPTE 259M, SMPTE 292M.
Television standard sample rate
of 48Khz,24 bit A/D conversion.
4:2:2
10‑bit
REC 601, REC 709
SDI and HDMI are switchable
between standard definitlon and high definition
Converter Utility.
Mac 10.11 El Capitan,
Mac 10.12 Sierra or later.
Windows 8.1 and 10.
12V power supply included with international socket adaptors for all countries.
0° to 40° C (32° to 104° F)
-20° to 45° C (-4° to 113° F)
0% to 90% non‑condensing
ATEM Camera Converter
Welcome wallet with QR code for software download
1 Year Limited Manufacturer’s Warranty.
Excluding connectors, cables, cooling fans, fiber optic modules, fuses, keyboards and batteries which will be free from defects in materials and workmanship for a period of 12 months from the date of purchase.
This model includes all the features of ATEM SDI Pro ISO model but has 8 SDI inputs and 4 SDI outputs. It can record 9 separate H.264 video streams in real time, allowing capture of all 8 clean feed inputs as well as the program video. A DaVinci Resolve project file is also saved.
NT$58,050
8
6
4
2 x 3.5mm stereo mini jack.
1 x 3.5mm stereo mini jack.
None
8 x 3G-SDI, 10-bit HD switchable.
2 channel embedded audio.
On all 8 SDI inputs.
On all 8 SDI inputs.
4
Ethernet supports 10/100/1000 BaseT for live streaming, software control, software updates and direct or network panel connection.
2 x USB Type-C 3.1 Gen 1 for external drive recording, webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
Hardware based real time.
4
2
Up to 4
Up to 4
DVE only.
9
5
2
2
Minimum monitor resolution of 1366 x 768.
11 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
ATEM SDI Extreme ISO supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.
USB-C 3.1 Gen 1 expansion port can record directly to external media.
8 x SDI ISO inputs as H.264 .mp4 files at up to 70Mb/s quality at the ATEM video standard with AAC audio.
1 x Program out as H.264 .mp4 file at the Streaming quality setting and at the ATEM video standard with AAC audio.
10 x 2 channel audio inputs recorded as separate 24‑bit 48KHz .wav files. Including 2 x analog 2 channel audio inputs and 8 x SDI 2 channel embedded audio inputs.
Program switching recorded as a DaVinci Resolve project .drp file.
Supports media formatted ExFAT (Windows/Mac) or HFS+ (Mac) file system.
Configurable to 16, 13, 10, 7 or 4 up views including Program, Preview, 8 SDI inputs, SuperSource, Clean Feed, Media Player, Streaming Status, Recording Status and Audio Meters.
HD
2
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel with camera control included. Supports optional hardware panel.
Ethernet supports 10/100/1000 BaseT. Ethernet used for direct connection between panel and chassis or via network. ATEM SDI Extreme ISO also supports direct USB‑C connection. Ethernet or USB‑C used for updating the software.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 11.0 Big Sur, Mac 12.0 Monterey or later and Windows 10 64 bit or Windows 11.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
36W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM SDI Extreme ISO
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
This model includes the features of ATEM SDI plus it adds built in streaming and recording to 5 video streams in real time! That's a clean feed of all inputs for multi‑cam editing! A DaVinci Resolve project is saved so you can open your live production to edit, remix audio and add color correction!
NT$30,900
4
3
2
2 x 3.5mm stereo mini jack.
None, embedded audio only.
None
4 x 3G-SDI, 10-bit HD switchable.
2 channel embedded audio.
On all 4 SDI inputs.
On all 4 SDI inputs.
2
Ethernet supports 10/100/1000 BaseT for live streaming, software control, software updates and direct or network panel connection.
1 x USB Type-C 3.1 Gen 1 for external drive recording, webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
Hardware based real time.
1
1
1
2
DVE only.
5
1
2
1
Minimum monitor resolution of 1366 x 768.
6 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
ATEM SDI Pro ISO supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.
USB-C 3.1 Gen 1 expansion port can record directly to external media.
4 x SDI ISO inputs as H.264 .mp4 files at up to 70Mb/s quality at the ATEM video standard with AAC audio.
1 x Program out as H.264 .mp4 file at the Streaming quality setting and at the ATEM video standard with AAC audio.
6 x 2 channel audio inputs recorded as separate 24‑bit 48KHz .wav files. Including 2 x analog stereo audio inputs and 4 x SDI 2 channel embedded audio inputs.
Program switching recorded as a DaVinci Resolve project .drp file.
Supports media formatted ExFAT (Windows/Mac) or HFS+ (Mac) file system.
1 x 10 Views including left right configurable Program/Preview, 4 SDI inputs, Media Player, Streaming Status, Recording Status and Audio Meters.
HD
1
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel with camera control included. Supports optional hardware panel.
Ethernet supports 10/100/1000 BaseT. Ethernet used for direct connection between panel and chassis or via network. ATEM SDI Pro ISO also supports direct USB‑C connection. Ethernet or USB‑C used for updating the software.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 11.0 Big Sur, Mac 12.0 Monterey or later and Windows 10 64 bit or Windows 11.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
36W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM SDI Pro ISO
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
ATEM SDI is fast to set up and easy to use. It includes 4 standards converted SDI inputs, USB webcam, 2 SDI outputs, Fairlight audio mixer with EQ and dynamics, DVE for picture in picture, transition effects, green screen chroma key, 20 stills media pool for titles and free ATEM Software Control.
NT$13,400
4
3
2
2 x 3.5mm stereo mini jack.
None, embedded audio only.
None
4 x 3G-SDI, 10-bit HD switchable.
2 channel embedded audio.
On all 4 SDI inputs.
On all 4 SDI inputs.
2
Ethernet supports 10/100/1000 BaseT software control, software updates and direct or network panel connection.
1 x USB Type-C 2.0 for webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
Hardware based real time.
1
1
1
2
DVE only.
5
1
2
1
Minimum monitor resolution of 1366 x 768.
6 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
1
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel included. Supports optional hardware panel.
Ethernet supports 10/100 BaseT. Allows direct connection between panel and chassis, or via network. Also used for updating the software. ATEM SDI supports direct USB-C connection.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 11.0 Big Sur, Mac 12.0 Monterey or later and Windows 10 or 11.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
18W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM SDI
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
The ATEM Streaming Bridge is a video converter that lets you receive a H.264 stream from any ATEM Mini Pro and convert it back to SDI and HDMI video. This means you can send video to remote locations around your local Ethernet network, or via the internet globally! That's possible because it uses advanced H.264 codecs for higher quality at very low data rates. Imagine broadcasters and bloggers collaborating on shows and creating global networks of ATEM Mini Pro remote broadcast studios. Setup is easy as the ATEM software utility can create setup files that you can email to remote ATEM Mini Pro studios. ATEM Streaming Bridge is the perfect way to use ATEM Mini Pro as a remote broadcast studio!
NT$9,150
1 x 3G-SDI
2 x 3G-SDI
2 Channels embedded in HD-SDI.
HDMI type A out.
2 Channels embedded in HDMI.
1.5G, 3G.
Black burst and Tri‑Sync.
Ethernet supports 10/100/1000 BaseT.
1 x USB Type-C for software configuration and software updates.
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 424M‑B, SMPTE 425 Level A and Level B.
4:2:2
Television standard sample rate of 48 kHz and 24 bit.
10-bit
YUV
ATEM Streaming Bridge supports video input streamed over ethernet from ATEM Mini and ATEM SDI models.
RTMP (Web Presenter, ATEM Mini, ATEM SDI)
SRT (Web Presenter)
Internal software upgrade via updater application.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
Mini Switches or setup utility software when connected by USB.
+12V universal power supply included with international socket adapters for all countries.
6W max.
6 - 30V DC.
EMC, FCC, CE and KCC.
0° to 40° C (32° to 104° F)
-20° to 60° C (-4° to 140° F)
0% to 90% non‑condensing
ATEM Streaming Bridge
12V universal power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
ATEM Mini Extreme ISO includes all the features of ATEM Mini Extreme, plus also records 9 separate H.264 video streams in real time, allowing capture of all 8 clean feed inputs as well as the program video. A DaVinci Resolve project file is also saved allowing the project to be recreated and edited later!
NT$51,650
8
4
2
2 x 3.5mm stereo mini jack.
1 x 3.5mm stereo mini jack.
None
8 x HDMI type A, 10-bit HD switchable.
2 channel embedded audio.
On all 8 HDMI inputs.
On all 8 HDMI inputs.
2
Ethernet supports 10/100/1000 BaseT for live streaming, software control, software updates and direct or network panel connection.
2 x USB Type-C 3.1 Gen 1 for external drive recording, webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
1280 x 720p 50Hz, 59.94Hz and 60Hz
1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60Hz
1920 x 1080i 50, 59.94Hz and 60Hz
Hardware based real time.
4
2
Up to 4
Up to 4
DVE only.
9
5
2
2
Minimum monitor resolution of 1366 x 768.
11 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
ATEM Mini Extreme ISO supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.
USB-C 3.1 Gen 1 expansion port can record directly to external media.
8 x HDMI ISO inputs as H.264 .mp4 files at up to 70Mb/s quality at the ATEM video standard with AAC audio.
1 x Program out as H.264 .mp4 file at the Streaming quality setting and at the ATEM video standard with AAC audio.
10 x 2 channel audio inputs recorded as separate 24‑bit 48KHz .wav files. Including 2 x analog 2 channel audio inputs and 8 x HDMI 2 channel embedded audio inputs.
Program switching recorded as a DaVinci Resolve project .drp file.
Supports media formatted ExFAT (Windows/Mac) or HFS+ (Mac) file system.
Configurable to 16, 13, 10, 7 or 4 up views including Program, Preview, 8 HDMI inputs, SuperSource, Clean Feed, Media Player, Streaming Status, Recording Status and Audio Meters.
HD
2
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel with camera control included. Supports optional hardware panel.
Ethernet supports 10/100/1000 BaseT. Ethernet used for direct connection between panel and chassis or via network. ATEM Mini Extreme ISO also supports direct USB‑C connection. Ethernet or USB‑C used for updating the software.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 10.14 Mojave, Mac 10.15 Catalina, Mac 11 Big Sur or later and Windows 10 64 bit only.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
36W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM Mini Extreme ISO
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
Affordable live switcher with 4 standards converted HDMI inputs, USB webcam out, audio mixer with EQ and dynamics, 2D DVE, transitions, green screen chroma key, 20 stills for titles and much more! ATEM Mini Pro also includes recording to USB disks in H.264 format, a built in hardware streaming engine for YouTube Live, Facebook, Twitch and more, plus multiview to see all cameras on a single monitor. Plus with the ATEM Mini Pro ISO model you also get recording of 5 streams including all input as clean feeds for editing, plus a DaVinci project file for fast edit turnaround and Blackmagic RAW file relinking for finishing in Ultra HD.
NT$19,750
4
2
1
2 x 3.5mm stereo mini jack.
None, embedded audio only.
None
4 x HDMI type A, 10-bit HD switchable.
2 channel embedded audio.
On all 4 HDMI inputs.
On all 4 HDMI inputs.
1
Ethernet supports 10/100/1000 BaseT for live streaming, software control, software updates and direct or network panel connection.
1 x USB Type-C 3.1 Gen 1 for external drive recording, webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
1280 x 720p 50Hz, 59.94Hz and 60Hz
1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60Hz
1920 x 1080i 50, 59.94Hz and 60Hz
Hardware based real time.
1
1
1
2
DVE only.
5
1
2
1
Minimum monitor resolution of 1366 x 768.
6 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
ATEM Mini Pro ISO supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.
USB-C 3.1 Gen 1 expansion port can record directly to external media.
4 x HDMI ISO inputs as H.264 .mp4 files at up to 70Mb/s quality at the ATEM video standard with AAC audio.
1 x Program out as H.264 .mp4 file at the Streaming quality setting and at the ATEM video standard with AAC audio.
6 x 2 channel audio inputs recorded as seperate 24‑bit 48KHz .wav files. Including 2 x analog stereo audio inputs and 4 x HDMI 2 channel embedded audio inputs.
Program switching recorded as a DaVinci Resolve project .drp file.
Supports media formatted ExFAT (Windows/Mac) or HFS+ (Mac) file system.
1 x 10 Views including left right configurable Program/Preview, 4 HDMI inputs, Media Player, Streaming Status, Recording Status and Audio Meters.
HD
1
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel with camera control included. Supports optional hardware panel.
Ethernet supports 10/100/1000 BaseT. Ethernet used for direct connection between panel and chassis or via network. ATEM Mini Pro ISO also supports direct USB‑C connection. Ethernet or USB‑C used for updating the software.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 10.14 Mojave, Mac 10.15 Catalina or later and Windows 10 64 bit only.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
36W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM Mini Pro ISO
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
ATEM Mini Extreme is an advanced switcher for true professionals! You get all the ATEM Mini Pro features plus 8 HDMI inputs, 2 separate HDMI outputs, 2 USB ports and a headphone connection. There are also 4 chroma keyers, 6 picture in picture DVEs, 2 media players, and a multiview with up to 16 views!
NT$39,700
8
4
2
2 x 3.5mm stereo mini jack.
1 x 3.5mm stereo mini jack.
None
8 x HDMI type A, 10-bit HD switchable.
2 channel embedded audio.
On all 8 HDMI inputs.
On all 8 HDMI inputs.
2
Ethernet supports 10/100/1000 BaseT for live streaming, software control, software updates and direct or network panel connection.
2 x USB Type-C 3.1 Gen 1 for external drive recording, webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50, 1080p59.94, 1080p60
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p50, 2160p59.94, 2160p59.94, 2160p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
1280 x 720p 50Hz, 59.94Hz and 60Hz
1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60Hz
1920 x 1080i 50, 59.94Hz and 60Hz
Hardware based real time.
4
2
Up to 4
Up to 4
DVE only.
9
5
2
2
Minimum monitor resolution of 1366 x 768.
11 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
ATEM Mini Extreme supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.
USB-C 3.1 Gen 1 expansion port can record directly to external media.
1 x Program out as H.264 .mp4 file at the Streaming quality setting and at the ATEM video standard with AAC audio.
Supports media formatted ExFAT (Windows/Mac) or HFS+ (Mac) file system.
Configurable to 16, 13, 10, 7 or 4 up views including Program, Preview, 8 HDMI inputs, SuperSource, Clean Feed, Media Player, Streaming Status, Recording Status and Audio Meters.
HD
2
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel with camera control included. Supports optional hardware panel.
Ethernet supports 10/100/1000 BaseT. Ethernet used for direct connection between panel and chassis or via network. ATEM Mini Extreme also supports direct USB‑C connection. Ethernet or USB‑C used for updating the software.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 10.14 Mojave, Mac 10.15 Catalina, Mac 11 Big Sur or later and Windows 10 64 bit only.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
36W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM Mini Extreme
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
ATEM Mini Pro is fast to set up and easy to use. It includes 4 standards converted HDMI inputs, USB webcam out, HDMI out, Fairlight audio mixer with EQ and dynamics, DVE for picture in picture, transition effects, green screen chroma key, 20 stills media pool for titles and free ATEM Software Control. ATEM Mini Pro also includes direct recording to USB flash disks in H.264 and direct streaming via Ethernet to YouTube Live and more. There's also a multiview with 4 cameras, media, preview and program plus status of recording, streaming and audio.
NT$11,800
4
2
1
2 x 3.5mm stereo mini jack.
None, embedded audio only.
None
4 x HDMI type A, 10-bit HD switchable.
2 channel embedded audio.
On all 4 HDMI inputs.
On all 4 HDMI inputs.
1
Ethernet supports 10/100/1000 BaseT for live streaming, software control, software updates and direct or network panel connection.
1 x USB Type-C 3.1 Gen 1 for external drive recording, webcam out, software control, software updates and panel connection.
720p50, 720p59.94, 720p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
None
4:2:2 YUV
10-bit
Rec 709
1280 x 720p 50Hz, 59.94Hz and 60Hz
1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60Hz
1920 x 1080i 50, 59.94Hz and 60Hz
Hardware based real time.
1
1
1
2
DVE only.
5
1
2
1
Minimum monitor resolution of 1366 x 768.
6 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video per channel plus separate gain control per channel.
Level and Peak metering. Plus new Fairlight audio enhancements: Compressor, Gate, Limiter, 6 bands of parametric EQ. Master gain control.
Unbalanced stereo
Up to 8 frames
1.8k
+6dBV
Available on both 3.5mm mini jack connections.
ATEM Mini Pro supports direct live streaming using Real Time Messaging Protocol (RTMP) over ethernet or a shared mobile internet connection over USB‑C.
1 x USB-C 3.1 Gen 1 expansion port for external media to direct record a .mp4 H.264 with AAC audio at the ATEM video standard.
Supports media formatted ExFAT (Windows/Mac) or HFS+ (Mac) file system.
1 x 10 Views including left right configurable Program/Preview, 4 HDMI inputs, Media Player, Streaming Status, Recording Status and Audio Meters.
HD
1
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel with camera control included. Supports optional hardware panel.
Ethernet supports 10/100/1000 BaseT. Ethernet used for direct connection between panel and chassis or via network. ATEM Mini Pro also supports direct USB-C connection. Ethernet or USB-C used for updating the software.
Includes ATEM Software Control Panel. Also compatible with ATEM Micro Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. ATEM Mini Extreme ISO can be configured using Blackmagic Videohub Hardware Panel Setup utility to route sources to destinations using Videohub Smart Control Pro and Videohub Master Control Pro.
ATEM Software Control Panel included free for Mac 10.14 Mojave, Mac 10.15 Catalina or later and Windows 10 64 bit only.
Using USB or Ethernet connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Mac 13.0 Ventura,
Mac 14.0 Sonoma or later.
Windows 10 and 11.
1 x External 12V power supply.
30W
5° C to 40° C (41° - 104° F)
-10° to 60° C (14° to 140° F)
0% to 90% non-condensing
ATEM Mini Pro
External 12V DC power supply with international socket adapters
1 Year Limited Manufacturer’s Warranty.
Connect with the wide experience of the developer community.
Software Developers Forum
Make sure you get the latest news, software updates, new SDK’s by registering as a Blackmagic Design developer to receive our Developer e-mails. You can also follow us on X(Twitter), Facebook or use our RSS feed to keep up to date with our latest product announcements.
View Privacy Policy
Sign up as a developer
